Large Silicone Resin Trinket Box Mold

14 reviews for Large Silicone Resin Trinket Box Mold

1. 

   Alicia KonertVerified Purchase

   Rated 4 out of 5

   November 5, 2020

   I do like these molds & appreciate that it comes with a frame, unfortunately the frame seems to not be the best size for the mold because both ends of the box bow in. I've learned that taping both end...More

   I do like these molds & appreciate that it comes with a frame, unfortunately the frame seems to not be the best size for the mold because both ends of the box bow in. I've learned that taping both ends of the mold to the frame keep this from happening. I have a lot of sanding to do on the 2 boxes I learned this lesson from though.

   Helpful? 0 0
   Sally AveretteVerified Purchase

   Rated 5 out of 5

   November 19, 2020

   VERY WELL MADE AND CAME WITH SUPPORT UNTIL CURED,I MADE SEVERAL XMAS GIFT, TRINKET BOX

   Helpful? 0 0
   

   Kaitlin ColeVerified Purchase

   Rated 5 out of 5

   December 18, 2020

   I've made several boxes with this mold. I saw there were a lot of reviews that mentioned the ripping of their molds so I made sure to very slowly remove it. I took my time and slowly worked it off wit...More

   I've made several boxes with this mold. I saw there were a lot of reviews that mentioned the ripping of their molds so I made sure to very slowly remove it. I took my time and slowly worked it off with no damage.

   Helpful? 0 0
   Georgia McLeanVerified Purchase

   Rated 4 out of 5

   December 21, 2020

   This isn't a bad product by any stretch of the imagination. It is much smaller than anticipated. The frame that comes with the mold to act as support is a great addition, however the tolerances are of...More

   This isn't a bad product by any stretch of the imagination. It is much smaller than anticipated. The frame that comes with the mold to act as support is a great addition, however the tolerances are off by about 1 mm. I noticed this AFTER the pour and had hoped that the weight and volume of the resin would have pushed out the side. It did not and the result was a wasted cast. It requires a good amount of resin to create the box which would have been helpful to know so that I was able to mix the correct amount the first go around. This is my first attempt at resin casting and the box was meant to be a gift. Hopefully, the second casting will be hardened enough to wrap it in time for Christmas. The lid mold is perfect. Edges will need a little finishing as the naturally forming meniscus of the surfaces can end up being quite sharp and unsightly.Unmolding was a breeze and it is obvious that the mold itself is very durable allowing for many, many more uses. Overall, a good product.

   Helpful? 0 0
   crystal schulteVerified Purchase

   Rated 3 out of 5

   December 30, 2020

   I’m giving this a 3 because the first time I used it the wooden frame cracked and is unusable now. This is an issue because I can no longer use the mold without the sides bowing out. So I got one use ...More

   I’m giving this a 3 because the first time I used it the wooden frame cracked and is unusable now. This is an issue because I can no longer use the mold without the sides bowing out. So I got one use out of it. Not worth what I paid for it. ?

   Helpful? 0 0
   Deana EmesVerified Purchase

   Rated 5 out of 5

   February 6, 2021

   Honestly impulse buy and was disappointed by the size

   Helpful? 0 0
   

   Courtney ZaveloffVerified Purchase

   Rated 5 out of 5

   February 15, 2021

   I make these when customers want a matching box for dominoes or other trinkets.

   Helpful? 0 0
   

   Nicol MoodyVerified Purchase

   Rated 1 out of 5

   March 10, 2021

   Ripped area in the mold . How can I get a non broken one?

   Helpful? 0 0
   Lisa McRaeVerified Purchase

   Rated 3 out of 5

   March 26, 2021

   It arrived and it is what we needed but it didn't have the outside stabilizer so we are wondering why it was shown or if it never made it to the package.

   Helpful? 0 0
   Erin HatfieldVerified Purchase

   Rated 5 out of 5

   May 18, 2021

   Easy to work with comes out looking just great be careful not to get it on anything else it’s a little hard to come off

   Helpful? 0 0